Functions for Master-Making
Cutting the Top Margin of the Original and Printing [Top Margin]
94
Cutting the Top Margin of the Original and
Printing
[Top Margin]
You can cut the top portion of the margin to between 0 to 99 mm (0.0" to 3.9") and make a master.
This feature enables you to skip the registration marks
*
on the original and print on the finish-sized paper without any
of these marks.
A margin on the paper periphery is required even if you use “Top Margin” function.
* About the Registration Mark
In the field of commercial printing, it is normal to print on paper that is larger than the finished size and then cut down
to the finished size afterwards. The symbol that indicates the position to cut in this event is known as the registration
mark.
Important!:
• When setting both the “Size” and “Top Margin”, cut the Top Margin within the specified range and then enlarge/
reduce the original.
• Do not use “Auto Reproduction Size”.
• This function cannot be used with “Multi-Up Print” or “2 Up”.
When performing Dual-Color printing,
[Top Margin]
can be set separately for each of the original of Print Drum (Cyl-
inder) 1 and the original of Print Drum (Cylinder) 2.
1
Place an original.
Place the original face-down on the Glass Platen.
To place the original, see
2
Touch [Top Margin] on the Func-
tions Screen.
3
Touch [ON].