Riso ME 6350, User Manual

Page: 56 / 306

Basic Operations
Printing from a Computer Data [Direct Print] [USB Job List]
56
Note:
• If the data contains multiple pages, repeat the
same steps for each page.
• Entering the number of copies from the Print
Quantity Keys will override the number speci-
fied in the Print dialog box.
• For “ID Print”, printing starts with specified Auto
Process mode after recognition.
• To manually stop a job during master-making or
printing operation, press the key. In mas-
ter-making process, the machine will stop after
the master is made. In printing process, the
machine will stop printing.
Press the
key to resume the job.
6
Remove the printed paper.
Open the Receiving Tray Paper Guides and
remove the paper.
Note:
• After printing is completed, the master remains
on the Print Drum (Cylinder). To protect confi-
dential documents from unauthorized duplica-
tion, use the Confidential feature to discard the
master after printing.
) p.169
Tip:
Job List Screen
Once the data is received, touch on the
Basic Screen to review current Job List. From the
Job List Screen, you can initiate output for jobs
pausing for output, or cancel jobs that are
“Paused/Data-Mapping/Waiting”.
Tip:
ID Print
The data sent from the printer driver as the “ID
Print” is retrieved from the ID Print Job Screen and
printed.
Touch
[ID Print Job] to display the Recognition
Screen, and follow the message on the screen.
The timing of the Recognition Screen differs
depending on the “User Management” settings
done by the administrator.
) p.133
Note:
• To set the “ID Print” in the printer driver, a user
registration number (ID) is required (one or two
digits).
Contact your administrator for the PIN Code or
registered USB Flash Drive, and the user regis-
tration number (ID).
Document_1.doc Document_1.doc RISO RISO 100 100 10 10
Document_2.doc RISO 200 1 01 01
Document_3.doc RISO 50 2
02 02
Document_4.doc RISO
Document_5.doc RISO
25 3
300 1