Basic Operations
Printing from Paper Documents
52
13
Press the
key when print job is
complete.
The setting returns to its default value.
Note:
• After printing is completed, the master remains
on the Print Drum (Cylinder). To protect confi-
dential documents from unauthorized duplica-
tion, use the Confidential feature to discard the
master after printing.
• Even if you do not press the
key, with the
passage of a certain amount of time (factory
default settings: 5 minutes), the settings will be
automatically reset.
14
Remove the printed paper.
Open the Receiving Tray Paper Guides and
remove the paper.
Tip:
Mono-Color printing with Print Drum (Cylin-
der) 2
We recommend that Print Drum (Cylinder) 1 be
used for Mono-Color printing, but you can also
use Print Drum (Cylinder) 2.
However, the paper size or the action of the
machine differs from Print Drum (Cylinder) 1.
Important!:
The paper sizes that can be used with Print Drum
(Cylinder) 2 are as follows:
• When using the high-speed function:
Vertical paper dimension of 364 mm (14
11
/
32
")
(B4) to 432 mm (17") (Ledger)
• Other than the above:
Vertical paper dimension of 257 mm (10
1
/
8
") or
above
Note:
When leaving a master made and wrapped
around Print Drum (Cylinder) 1 and only using
Print Drum (Cylinder) 2, a warning message is dis-
played when printing. Follow the instructions on
the screen. Also, Print Drum (Cylinder) 1 may
automatically be set to confidential when a master
is made.
Tip:
Auto Idling
When “Auto Idling” is set to ON, idling operations
may be activated when master-making process is
initiated.
Factory default is set to idle automatically at the
beginning of the master-making when the
machine is inactive for over 12 hours.
Note:
• When Mono-Color printing with Print Drum (Cyl-
inder) 1, Print Drum (Cylinder) 2 may also idle
during auto idling.
To toggle “Auto Idling” ON/OFF, or to modify the
number of hours before activating next idling, go
to the Admin. Screen.
Idling can also be manually initiated when making
a master.
