Rion VM-56, Instruction Manual, Page: 35 / 180

23
Preparations
SD card slot
SD memory card
By sliding this switch in
the arrow direction, you
can write-protect the
card.
Label side should
face up
SD memory card and program cards
Measurement data can be stored on an SD memory card for use and further
processing in a computer. Optional program cards can also be used for install-
ing software into the unit to expand the measurement functions of the unit.
Inserting a card
Important
Make sure that power is OFF before inserting
or removing a card.
Take care to insert the SD memory card with
correct orientation.
If the SD memory card is removed while data is
being read or written to the card, the data may
be destroyed.
Use SD memory cards provided by Rion. The
performance of other cards is not guaranteed.
Note that we assume no responsibility for any
damage or loss of stored measurement data.
1. Open the top cover of the unit.
2. Insert the SD memory card into the card slot on the top of the unit with
the label of the card facing up. Push the card in until it is locked in place.
3. To remove the card, push the card a bit further in, the card is released
and pops out of the card slot.