Rion VM-56, Instruction Manual, Page: 107 / 180

95
Serial Interface
Disconnection from the computer
VM-56 will be recognized as “removable media”. Consequently, the correct
procedure as described below must be followed when disconnecting the VM-56.
1. Click on the “Safely remove hardware” icon in the right section of
the taskbar, and select “Safely remove USB Mass Storage Device -
Drive (*1)”.
*1: The drive letter (E in the example shown) will differ, depending
on the computer confi guration.
2. When the message shown below appears, disconnect the USB cable.
The VM-56 is now properly disconnected.