Rion VM-56, Instruction Manual, Page: 125 / 180

113
Serial Interface
Range Z
Zch range upper limit
Setting of Z channel range
Setting command Range Z, p1
Parameter p1= “1”
p1= “10”
Request command Range Z?
Response data d1
Returned value Same as for setting command
Display Channel Setting
Display channel setting
Setting of display channel
Setting command Display Channel Setting, p1
Parameter p1= “X” (Xch)
p1= “Y” (Ych)
p1= “Z” (Zch)
P1= “XYZ” (Three axis)
Request command Display Channel Setting?
Response data d1
Returned value Same as for setting command
Max Hold Reset
Max hold reset
Reset the max hold value
Setting command Max Hold Reset, p1
Parameter p1= “Off”
p1= “On”
The value is reset regardless of a parameter.
This command is invalid except for when the max hold screen is dis-
played.