Rion VM-56, Instruction Manual, Page: 29 / 180

17
Preparations
Power-on mode switch
Opening the battery compartment as shown below gives access to a switch
labeled “A-B”. Normally the “A” position is used. Setting this switch to the
‘’B’’ position allows the unit to be turned on simply by supplying power to the
DC IN connector. In this case, the POWER key on the operation key panel of
the unit has no effect.
[Power-on mode]
switch
Important
When using the unit with the switch in the “B”
position, do not insert batteries.
If the unit is turned off immediately after changing
the setting while using the unit with the switch
in the “B” position, the setting may not be re-
sumed. After changing the setting, wait at least
10 seconds before turning the unit off.