Rion VM-56, Instruction Manual, Page: 126 / 180

114
Serial Interface
I/O
OUTPUT
Output setting
Setting signal output
Setting command OUTPUT, p1
Parameter p1= “Off”
p1= “On”
Request command OUTPUT?
Response data d1
Returned value Same as for setting command
OUTPUT Quantity
Output quantity
Setting output signal type
Setting command OUTPUT Quantity, p1
Parameter p1= “Acc”
p1= “Acc.nonBand Limiting”
p1= “Vel”
Request command OUTPUT Quantity?
Response data d1
Returned value Same as for setting command