Rion VM-56, Instruction Manual, Page: 141 / 180

129
Serial Interface
Acc Lower
Frequency weighting of Acc lower
Setting lower limit of frequency range for Acc.
Setting command Acc Lower, p1
Parameter p1= “0.5Hz”
p1= “1Hz”
p1= “4Hz”
Request command Acc Lower?
Response data d1
Returned value Same as for setting command
Acc Upper
Frequency weighting of Acc upper
Setting upper limit of frequency range for Acc.
Setting command Acc Upper, p1
Parameter p1= “80Hz”
p1= “100Hz”
p1= “250Hz”
p1= “Sensor Dependent”
Request command Acc Upper?
Response data d1
Returned value Same as for setting command
Vel Disp Build Lower
Frequency weighting of building Vel and Disp lower
Setting lower limit of frequency range for Building damage Vel. and Disp.
Setting command Vel Disp Build Lower, p1
Parameter p1= “0.5Hz”
p1= “1Hz”
p1= “4Hz”
Request command Vel Disp Build Lower?
Response data d1
Returned value Same as for setting command