Rion VM-56, Instruction Manual, Page: 137 / 180

125
Serial Interface
Sleep Mode
Sleep mode
Setting ON/OFF of sleep mode
Setting command Sleep Mode, p1
Parameter p1= “Off”
p1= “On”
Request command Sleep Mode?
Response data d1
Returned value Same as for setting command
Manual Address
Manual store address
Setting manual store address
Setting command Manual Address, p1
Parameter p1= “1 to 1000”
Request command Manual Address?
Response data d1
Returned value Same as for setting command
Measure
Measurement
Measurement start and stop
Setting command Measure, p1
Parameter p1= “Start”
p1= “Stop”
Request command Measure?
Response data d1
Returned value Same as for setting command
When executing the command on the address in which data exists already,
the data is overwritten.