Rion VM-56, Instruction Manual, Page: 142 / 180

130
Serial Interface
Vel Disp Build Upper
Frequency weighting of building Vel and Disp upper
Setting upper limit of frequency range for Building damage Vel. and Disp.
Setting command Vel Disp Build Upper, p1
Parameter p1= “80Hz”
p1= “100Hz”
p1= “250Hz”
p1=“Sensor Dependent”
Request command Vel Disp Build Upper?
Response data d1
Returned value Same as for setting command
Vel Human Lower
Frequency weighting of human Vel lower
Setting lower limit of frequency range for Human exposure Vel.
Setting command Vel Human Lower, p1
Parameter p1= “0.5Hz”
p1= “1Hz”
p1= “4Hz”
Request command Vel Human Lower?
Response data d1
Returned value Same as for setting command