Rinnai aiM 115, User And Installation Manual, Page: 38 / 66

34
Requirements and conditions
Accessing The Menus
Accessing The Menus
It is possible to set the operation of the boiler or the cascade
system via the front panel of the boiler.
There are four user levels of boiler programming,each of
which allows different settings:
•
End User Menu: allows the management of most part of
the parameters to ensure correct operation of the plant;
•
Commissioning menu: used by personnel specialized,
allows the configuration of multiple parameters specific;
•
Specialist Menu: used only by Rinnai authorised service
technicians, allows the configuration of some functions
details (historical errors, gas conversion, displacement
climatic curve, DHW setting);
•
OEM menu: dedicated to the factory setting of the device,
to access it it is necessary to insert it of a password.
Parameter setting
From the main screen (screen from which the boiler
temperature or cascade temperature is visible):
•
press the “Ok” key and then the info key for 6 seconds;
•
turn the central knob on the control panel e select the
Menu;
•
Confirm the choice with the “Ok” button;
•
Turn the knob to scroll through the categories of available
parameters;
•
Press the “Ok” key to confirm;
•
Turn the knob to scroll the parameter from edit or view;
•
Press the “Ok” key to confirm;
•
Turn the knob to change the parameter value
•
Press the “Ok” button to confirm.
Some of these parameters may not be visible either there are
additional parameters. This depends on the accessories that
are connected to the device (for example pumps, sensors,
cascade of luminaires and external modules).
To exit this display mode is sufficient press the ESC key. If
no further is made changes or select other functions within 8
minutes on display will show the standard display again.
End user menu parameters
End user menu parameters
Description Parameter Selection
Time and date
1 Hours / Minutes
2 Month / Day
3 Year
Control unit 20 Language
Time program heating circuit 1 500-516 Preselection, Periods
Time program heating circuit 2 520-536 Preselection, Periods
Time program 3 / HC 540-556 Preselection, Periods
Time program 4 / DHW 560-576 Preselection, Periods
Time program 5 600-616 Preselection, Periods
Holidays CR 1 641-648 Periods, Start-End
Holidays CR 2 651-658 Periods, Start-End
Holidays CR 3 661-668 Periods, Start-End
Heating circuit 1
710 Comfort
712 Reduced
714 Frost protection
720 Climate curve
730 Summer / winter limit value
Heating circuit 2
1010 Comfort
1012 Reduced
1014 Frost protection
1020 Climate curve
1030 Summer / winter limit value
Heating circuit 3
1310 Comfort
1312 Reduced
1314 Frost protection
1320 Climate curve
1330 Summer / winter limit value
Domestic Hot Water (DHW) 1610 DHW storage temperature
Boiler 2214 Manual control setpoint
Fault 6705 Error diagnostics
Operation Maintenance Service
7130 Chimney sweep function
7131 Burner power
7140 Manual operation
Boiler diagnostics parameters
8338 Burner operating hours
8527 Tot. En. solar sold
8530 Solar operating hours
User diagnostics
8700 External temperature
8701 Minimum outside temperature
8702 Maximum outside temperature