Rinnai aiM 115 User And Installation Manual Download Page 2

Page: 2 / 66

Rinnai modular gas condensing boilers are CE certified products

by the European certification body. Their technical and functional

characteristics comply with the following standards and directives:

2009/142 / EC - DIRECTIVE ON GAS APPLIANCES
92/42 / EC - ENERGY PERFORMANCE REQUIREMENTS FOR NEW

HOT WATER BOILERS, FUELED WITH LIQUID OR GASEOUS

FUELS
2014/30 / UE - DIRECTIVE ON ELECTROMAGNETIC

COMPATIBILITY
2014/35 / UE - LOW VOLTAGE DIRECTIVE
2006/42 / EC - NEW MACHINES DIRECTIVE
2010/30 / UE - DIRECTIVE ON ENERGY LABELING:

Commission Delegated Regulation (EU) No: 811/2013 of 18 February

2013 supplementing Directive 2010/30 / EU of the European

Parliament and of the Council concerning the energy labeling of space

heaters, mixed heaters, sets of space heaters, temperature control

devices and solar devices and sets of mixed heaters, temperature

control devices and solar devices.

2009/125 / EC - ECO-SUSTAINABLE DESIGN DIRECTIVE (Erp):

Commission Regulation (EU) No: 813/2013 of August 2013

implementing Directive 2009/125 / EC of the European Parliament

and of the European Council and referring to the eco-sustainable

requirements for heating devices in mixed heating spaces.

UNI-EN 15502-1: 2012 + A1: 2015 - Gas heating boilers Part 1:

General requirements and tests.

UNI-EN 15502-2 -1: 201 Gas heating boilers Part 2-1:

Specific standard for type C appliances and type B2, B3 and B5

appliances with nominal heat input not exceeding 1000 kW.

Summary of Contents for aiM 115



































































Search results

Summary of Contents for aiM 115

Reviews:

Related manuals for aiM 115

Brands by name

Popular brands

Rinnai aiM 115, User And Installation Manual

Search results

Summary of Contents for aiM 115

Reviews:

Related manuals for aiM 115

Brands by name

Popular brands