RIGOL
Self-Test
Copyright 2004 Rigol Electronic
2-48
Press UTILITY
→
Self-Test to enter the following menu.
Figure 2-45 Table 2-30
Menu
Settings
System Info
Press to display the information of scope.
Screen Test
Press to run screen test program.
Key Test
Press to run keypad test program.
1. System Info:
Press this soft button to display the information of oscilloscope. It contains Model,
Power up times, Serial No., Software version and Installed module of the
oscilloscope. And you could follow the prompting message of " <<Press ‘RUN’ Key to
Exit The Test>>" to exit this interface.
2. Screen Test:
Press this soft button to run Screen Test program. Fellow the prompt message on
the screen “Press ‘RUN’ Key to Continue the Test”. The screen of DS5000M series
turns black or white in sequence (Mono) and the screen of DS5000C series turns red,
green and blue in sequence (Color) when keep pressing the RUN/STOP button. You
could check the screen for display failures.
3. Key Test:
Press this soft button to run Keyboard Test program and start the keyboard test
routine. The blocks represent the buttons on the front-panel; the rectangular boxes
with two arrows beside represent the knobs on the front-panel; the square boxes
represent the pressing function for the SCALE knobs. Test all keys and knobs, and
check the blocks on the screen response whether or not.
User Manual for DS5000 Series