RIGOL
6
．
To invert a waveform
Invert turns the displayed waveform 180 degrees, as respect to the ground level,
and is available for channel 1 and 2 only. When the oscilloscope is triggered on the
inverted signal, the trigger is also inverted.
Push the CH1 or CH2 button and then press the Invert button to invert the
waveform on this activated channel.
Figure 2-10 and 2-11 show the changes after inversion.
Copyright 2004 Rigol Electronic
2-9
User Manual for DS5000 Series
Figure 2-10
Set invert OFF
The waveform before inversion
Figure 2-11
Set invert ON
The waveform after inversion