RIGOL
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to this
product on any products connected to it. To avoid potential hazards use this product
only as specified
Only qualified personnel should perform service procedures
To Avoid Fire or Personal Injury
Use proper power cord
use only the power cord specified for this product and
certified for the country of use.
Connect and Disconnect Property.
Do not connect or disconnect probes or test
leads while they are connected to a voltage source
Ground the product
this product is grounded through the grounding conductor of
the power cord. To avoid electric shock the grounding conductor must be connected
to earth ground. Before making connections to the input or output terminals of the
product ensure that the product is properly grounded.
Connect the probe properly.
The probe ground lead is at ground potential. Do
not connect the ground lead to an elevated voltage.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all rating
and marking on the product. Consult the product manual for further ratings
information before making connections to the product.
Do not operate without Covers.
Do not operate this product with covers or
panels removed.
Use Proper Fuse.
Use only the fuse type and rating specified for this product.
Avoid Exposed Circuitry.
Do not touch exposed connections and component
when power is present.
Do not operate with suspected failures.
If you suspect there is damage to this
products, have it inspected
Provide Proper Ventilation.
Refer to the manual’s installation instructions for
details on installing the product so it has proper ventilation.
Do not operate in wet/damp conditions
Do not operate in an explosive atmosphere
Keep product surfaces clean and dry
Copyright 2004 Rigol Electronic
II
User Manual for DS5000 Series