RIGOL
To set up the horizontal system
Figure 1-11 shows the menu button, position and scale knobs of horizontal system.
The following exercise guides you through these buttons, knobs, and status bar.
Figure 1
－
11
1. Turn the SCALE knob and notice the change it makes to the status bar.
The horizontal SCALE knob changes the sweep speed in a 1-2-5 step sequence, and
the value is displayed in the status bar. The time base ranges of the DS5000 series
are listed as follows.
From 1 ns/div* to 50 s/div and they can reach 10ps/div* in Delayed Scan mode.
* NOTE:
This characteristic varies by different model.
Delayed Scan Shortcut key
To press the SCALE knob in the horizontal control area on the front-panel is
another way to enter or exit Delayed Scan mode and it is equal to the
following menu operations, MENU
→
Delayed.
2 The horizontal POSITION knob adjust horizontally signal on waveform
window
Copyright 2004 Rigol Electronic
1-12
User Manual for DS5000 Series