RIGOL
Trigger
DC
CH1, CH2: 1div(DC~10MHz)
EXT: 100mV(DC~10MH), 200mV(10MHz ~ Full)
EXT/5: 500mV(DC ~ 10MHz), 1V(10MHz ~ Full)
AC
Same as DC at 50Hz and above
LF REJ
Same as the DC- coupled limits for frequencies
above 100 kHz, attenuates signals below 8kHz.
Trigger Sensitivity,
(Edge Trigger Type)
HF REJ
Same as the DC- coupled limit from DC to 10
kHz, attenuates signals above 150 kHz
Internal
±12 divisions from center of screen
EXT ±1.6V
Trigger Level Range
EXT/5 ±8V
Internal ±(0.3div×Volts/div) (±4 divisions from center of
screen)
EXT
±(6% of s 40 mV)
Trigger Level
Accuracy, (typical)
EXT/5
±(6% of s 200 mV)
Trigger offset
Pretriger14div, delay trigger 1s
Trigger Holdoff range 100ns-1.5s
Set Level to 50%,
(Typical)
Operates with input signals
≥
50 Hz
Default Settings,
Video Trigger
Trigger mode is Auto and Coupling is AC
Internal
Pk-pk amplitude of 2 divisions
EXT 400mV
Sensitivity,
(Video Trigger Type,
typical)
EXT/5 2V
Signal Formats and
Field Rates, Video
Trigger Type
Supports NTSC, PAL, and SECAM broadcast systems for any field
or any line
Pulse trigger:
Pulse Trigger mode
(
≥
,
≤
,=)+width (
≥
,
≤
,=)-width
Pulse width range
20ns-10s
Measurements
Manual
Voltage difference between cursors (
∆
V)
Time difference between cursors (
∆
T)
Reciprocal of
∆
T in Hertz (1/
∆
T)
Track
Voltage value for Y-axis waveform
Time value for Y-axis waveform
Cursors
Measure
Auto
Measure
Cursors are visible for Automatic Measurement
Auto Measure Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot,
Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty,
-Duty, Delay1
→
2 , Delay1->2
Copyright 2004 Rigol Electronic
6-4
User Manual for DS5000 Series