4
The manual applies to devices of EXM series modules. For more information about
expansion module or accessories, please refer to the correlative model instruction files.
Safety Guideline
This manual contains notices you have to observe in order to ensure your personal
safety, as well as to prevent damage to property. The notices referring to your
personal safety are highlighted in the manual by a safety alert symbol; notices referring
to property damage only have no safety alert symbol. The notices shown below are graded
according to the degree of danger.
Caution
Indicates that death or severe personal injury may result if proper precautions are not
taken
Caution
With a safety alert symbol indicates that minor personal injury can result if proper
precautions are not taken.
Caution
Without a safety alert symbol indicates that property damage can result if proper
precautions are not taken.
Attention
Indicate that an unintended result or situation can occur if the corresponding notice is
not taken into account.
If more than one degree of danger is present, the warning notice representing the
highest degree of danger will be used. A notice warning of injury to persons with a safety
alert symbol may also include a warning relating to property damage.
Summary of Contents for EXM-12DC-DA-R-HMI
