Rievtech EXM-12DC-DA-R-HMI, User Manual

Page: 171 / 443

171
5.6 Status messages
The receiver of the status messages can be chosen from the telephone book. In order to do this click with the
mouse pointer onto the expand arrow and select the required entry.
The SMS relay can send the following status messages:
Remote enquiry of all inputs and outputs
The device offers the possibility to interrogate all input and output states by SMS. A code word is therefore
sent by SMS to the device. The code word can be individually created. The default code word is:
?#all
The answer is sent to the same phone number from which the correct code word was received (phone
number identification). The states of the inputs and outputs are displayed as follows in the SMS message:

Message at the start
A message for each start up (switching on / return of power) of the SMS relay is sent (According to the phone
number assigned to the event). The message contents can be edited.

Periodical message
The periodic message provides information of the device’s current status and is sent periodically. The
message can be sent daily (time), weekly (time, weekday) or monthly (time, date). The message text can be
edited. It is for checking functionality or operation confirmation.
Note: All messages have two optional message formats: A. TEXT B. PDU(UCS2) (Protocol Data
Units)
A.TEXT is supposed to support ASC
Ⅱ
.( Up to 100 chars can be edited)
B.PDU is supposed to support multi languages.(Up to 70 chars can be edited)
5.7 Input configuration
5.7.1 General
Depending of the device type, all this inputs can be used as digital inputs or as digital / analogue
inputs .