Rievtech EXM-12DC-DA-R-HMI, User Manual

Page: 343 / 443

343
If there is data transmission, the status of the com port on the LCD will be flashing.
6.5.43 Analog filter
Short Description
Connection Description
Input Ax Analog Inputs
Analog Outputs
Analog Flags
The block number of a function with analog output
Parameter Sn (Number of samples): determines how many analog values are sampled within the
program cycles that are determined by the set number of samples. x-Messenger
samples an analog value within every program cycle. The number of program cycles is
equal to the set number of samples.
Possible settings:
8, 16, 32, 64, 128, 256
Output AQ AQ outputs an average value of the analog input Ax over the current number of
samples, and it is set or reset depending on the analog input and the number of
samples.
* Analog inputs: 0 to 10 V corresponds with 0 to 1000 (internal value).
Parameter
You can set the number of samples to the following values: