Rievtech EXM-12DC-DA-R-HMI, User Manual

Page: 371 / 443

371
Exit Exit the eSmsConfig
6.8.1.2 Edit
Fig. 10.2 Edit Menu
※
Undo: Undo the previous step operation and support consecutive operations.
※
Redo: Recover the contents undone by the previous step of operation and support consecutive operations.
※
Cut: Cut the contents in the area highlighted with the cursor.
※
Copy: Copy the contents highlighted with the cursor.
※
Paste: Paste the contents cut or copied.
※
Delete: Delete various graphic components.
※
Select All: Select all the contents in the current window editing box and setup the label.
※
Goto Apponited block: Goto the apponited block in the program interface.
※
Property: open the property box of the apponited block
※
Properties (all blocks): Open all the property boxes of the selected blocks.
※
Phonebook: Add/Delete phone number into phonebook Refer to the chapter 6.5.2 .
6.8.1.3 Tools
This instruction is mainly used for reading program from x-Messenger, writing program to x-Messenger,
diagnosis the communication situation of x-Messenger, program management and simulation and so on. The
pull down menu of Tools is shown as the following: