Rievtech EXM-12DC-DA-R-HMI, User Manual

Page: 47 / 443

47
This is to change receiver 1 for all the sms message output block in the program.
EMALQ, means the the receiver email address in the sms message output block.
1 means the receiver 1 in the block, this number can be 1 to 3.
xLogic@163.com; It is the phone number which will be set into the receiver.
3.3.2 Voice alarm
With '-v" series x-Messenger CPU means the voice function is available. Voice function includes voice alarm,
telephone control function and
automatic dialing function. Voice alarm can be realized via the audio jack (see A
below)
or the
built in speaker in certain models (see B below)
, alarm message also can be got after you hold the call
from x-Messenger and press the button on your phone according the prompt voice. Telephone control
function means you can control the x-Messenger with your phone remotely.
Structure of the voice interface
A
With HMI model(-v)
A.Voice module on-line recording audio input port &Audio output port (to be connected with the microphone
(Input) or speaker (Output) ) Applied to both with HMI model and without HMI model.
How to record the voice section into x-Messenger?
Before recording, equip your PC with voice card , otherwise the recording can’t be carried out.