Rievtech EXM-12DC-DA-R-HMI, User Manual

Page: 169 / 443

169
5.3 Create connection
1.Cut off the power supply of the x-Messenger SMS Relay
2.Insert the SIM card
3.Connect the x-Messenger module and PC via the following optional methods:
Option A . EXM-RS232 /EXM-USB
Option B . EXM-USB-B
Option C . Ethernet (Only available for the model which has Ethernet interface )
4. Connect power supply to the x-Messenger SMS Relay
5. As soon as the Status-LED of the x-Messenger SMS Relay flushes in a cycle off 1 second,
the software can be started.
6. Choose a saved file or create a new one.
7.For transmission, choose the required COM port of your PC or required IP address and port
Number by click” ”..
Everything is now set up to download the prepared configuration file to the device.
5.4 Edit telephone book
Add – register of a new phone number
Edit – editing of an already existing entry
Delete – deleting of an existing entry
Please enter the phone number in international format (i.e. with country code and prefix), e.g.
+41793333333. (+41 Switzerland; +49 Germany, +31 Netherland, etc)
5.5 Standard mode settings
The default settings for SMS transmission contain important general data which help to identify the device.
The SIM card can be protected with a PIN code just like for normal cell phone use. The PIN request is activated
and the PIN code is input in the required field. This concerns PIN1. Further information can be obtained from
the SIM card manual. Likewise the process of unblocking the SIM card after three incorrect inputs of PIN1 is
described in the SIM manual. In order to do this, the SIM card must be removed from the SMS Relay and