11
GB
3.11 Servomotors
Technical Data
Fuel
servomotor
Air
servomotor
Model
SQM33.4..
SQM33.5..
Type of motor
Stepping motor
Electrical supply
AC/DC 24V
IP
IP54
Firing rate
0 - 90°
Opening time 0-90°
min: 5 s, max.: 120 s depending on the type of control box
Torque
1.2 Nm
3 Nm
Input power
7.5 W
10 W
Rotation
Clockwise/anticlockwise (can be selected from the control box)
Introduction
The servomotors that equip the burners of the
RS
range work directly on
the air damper and the gas butterfly valve, without mechanical lever-
ages but via the interposition of an elastic coupling.
They are commanded by the control box, which constantly checks their
position by means of a return signal from the optic sensor inside the ser-
vomotor.
For this reason it is absolutely forbidden to remove
the cover of the servomotors.
The position (in degrees) of the servomotors can be seen on the display
of the Operator Panel. See Ch. 5.18, Parameter 922, index
“0”
for fuel
servomotor, index
“1”
for air servomotor.
The servomotors are electrically connected to the control box by means
of RAST 2.5 type connectors.
When servicing or replacing the servomotors, take care not to invert
the connectors.
Follow the indications given in the electrical layouts or
the silkscreen printing on the control box cover.
WARNING
Fig. 7
D8271
Technical description of the burner
3
Summary of Contents for RS 100/E MZ
