Installation options for output shafts
Refer to (if applicable):
•
§4.5.1 for the (most) used connections of
basic
output shafts
to operated systems (installation
options A–F)
•
§4.5.2 for the installation options (A–F) of
special output shafts
•
§4.5.3 for the installation of
chains
onto sprockets (for installation options A–D)
•
§4.6 for
TRA
models with TRA drive-unit (installation options G, H, I)
•
§4.7 for
L
models with belt drum (installation option J)
•
§4.8 for
L
models with cable drum (installation option K).
4.1 Special tools and equipment
No special tools or equipment are necessary to install, to connect or for commissioning.
4.2 Mounting positions
•
Refer to the illustrations and use only a permitted mounting position for installation!
•
After installation
interchange the plug in the highest position with the vent plug! This is
not
applicable to motor gearboxes that are filled with grease!
RW45 [grease lubrication]:
Make sure that the correct equipment and tools are used.
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
15
