4.5 Installation options A–F for output shafts
4.5.1 Basic output shafts (BOS)
Installation options A–F show the (most) used connections (chain couplings/universal joints) of
basic
output shafts
(BOS) to operated systems.
* M8 and M10 bolts with lock nuts (and related tightening torque) are recommended for the
applicable configuration.
** D is supplied as two parts (chain, chain connector).
In this manual shown illustrations can be different than the components and/or systems. For more
information on item numbers and models refer to the Ridder catalog or website at
.
4.5.2 Special output-shafts (D, LD, LK ....)
Installation options A–F are (possibly) also applicable, if necessary for the operated system, for
models such as
D, LD
or
LK
(or other designations).
NOTE:
Make sure that the configuration, together with the operated system, agrees with §1.3
“Warning about discouraged use” and §3.3 “Application” (intended use). Possibly approval
from Ridder Drive Systems is necessary.
HEX 4 mm -
15 Nm
ø8.5mm (4x)
/ ø10 (6x)
[M8]
[M10]
P26.5
Welded attachment
Welded attachment
Tube
Tube
Tube
Shaft
Sprocket
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
23
