Ricoh RC Gate A TTP, Manual

Page: 46 / 171

RC Gate A Training
46
Slide 46
Register the Connected Devices
Local Device Registration
‰
At the RC Gate A UI, use the Device Registration Wizard.
Š
Devices found in the IP address ranges set up with the
Device Registration Wizard will become ‘managed’.
‰
Then, again at the RC Gate A UI, use the Auto Discovery
Registration Wizard.
Š
AD must be on
Š
Devices found in the IP address ranges set up with the Auto
Discovery Registration Wizard will become ‘monitored’.
‰
Then, at the Center GUI, select all devices that show
‘Found’ on the device list, and click ‘Register Devices’.
These will become ‘managed’ devices.
Š
Normally, ‘Found’ devices automatically convert to
‘Registered’. But if the system is still busy looking for
devices before a timeout (1 hour) occurs, then the devices
will still be displayed as ‘Found’.
ˆ
This is basically the same as the previous model ‘RC Gate’.