Ricoh RC Gate A TTP, Manual

Page: 113 / 171

RC Gate A Training
113
Slide 113
Overview
‰
This section will explain how to help a customer who has a
number of RC Gates to change over to RC Gate A.
Š
The RC Gate A must have the storage and memory
options, and the ‘Extended Function Setting’ must be set to
‘Use’.
‰
Work must be done at the Center GUI and at the customer
site.
‰
We will explain in detail how to do this.
Š
The process will be started at the customer site using
Device Registration Wizard.
Š
Then, if some devices do not get registered, pick them up
the next day at the Center GUI using Remote Registration.
‰
We will also explain how to set up ACL levels for
technicians who work on machines for a customer that has
machines in more than one country (e.g. GMA customer).
ˆ
Storage and memory options, Extended Function Setting: These were explained
earlier in the installation part of the course.
ˆ
The storage and memory options must be installed, because if you have
managed data from more than one RC Gate, the RC Gate A will not be able to
hold the data if these options are not installed.