Ricoh RC Gate A TTP Page 123 Manual Download

Page: 123 / 171

RC Gate A Training

123

Slide 123

Procedure (Summary) - 6

Red line: Must wait for the operation above the line to finish.

Wait for at least an hour (until
automatic hourly polling is done).

Check the list of registered
devices.

Compare it with the exported
device list CSV files (from slide
1).

Make sure that all devices are
registered and Managed

If any failed, investigate, and try
to recover.

Retrieve the device information by
importing from the Exported Device
List CSVs.

Edit the M/R date of each registered
device (each device must have the
correct setting for this value).

Center Operator by GUI work flow

Field Engineer work flow

No additional notes

Summary of Contents for RC Gate A TTP












































































































































































Search results

Summary of Contents for RC Gate A TTP

Reviews:

Related manuals for RC Gate A TTP

Brands by name

Popular brands

Ricoh RC Gate A TTP, Manual

Search results

Summary of Contents for RC Gate A TTP

Reviews:

Related manuals for RC Gate A TTP

Brands by name

Popular brands