Ricoh PJ WU6181 N, User Manual

Page: 84 / 268

69
4. Multi-Screen Projection
❸
Displaying a Picture Using [EDGE BLENDING]
A high resolution video can be projected on an even bigger screen by combining multiple projectors on the left, right, top and
bottom.This projector is equipped with an “EDGE BLENDING Function” that makes the edges (boundaries) of the projection screen
indistinguishable.
NOTE:
• For projector throw distances, refer to “Throw distance and screen size” on page
231 .
• Before performing the Edge Blending function, place the projector in the correct position so that the image becomes square in the appropriate size, and then make
optical adjustments (lens shift, focus, and zoom).
• Adjust the brightness of each projector using [LAMP ADJUST] under [LAMP MODE]. In addition, use [REF. WHITE BALANCE] to adjust the [CONTRAST], [BRIGHTNESS]
and [UNIFORMITY].
Before explaining use of the Edge Blending function
This section explains the case for “Example: Placing two projectors side by side”. As shown, the projected image on the left is
referred to as “Projector A” and the projected image on the right is referred to “Projector B”. Unless otherwise specified hereinafter,
the “projector” is used to mean both A and B.
Example: Placing two projectors side by side
Edge Blending area
Projected area
Projected area
Projector A Projector B