Ricoh PJ WU6181 N, User Manual

Page: 33 / 268

18
2. Projecting an Image (Basic Operation)
❹
Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the INPUT button for 1 second or longer. The projector will search for the
available input source and display it. The input source will change as follows:
Automatically checks for any input signal in the order HDMI 1
→
HDMI 2
→
Display Port
→
BNC
→
BNC(CV)
→
BNC(Y/C)
→
COMPUTER
→
USB-A. The
input signal will be projected when it is detected.
• Press it briefly to display the [INPUT] screen.
Press the
▼
/
▲
buttons to match the target input terminal and then press the
ENTER button to switch the input. To delete the menu display in the [INPUT]
screen, press the MENU or EXIT button.
TIP: If no input signal is present, the input will be skipped.
Eternet
Using the Remote Control
Press any one of the 1/HDMI 1, 2/HDMI 2, 3/DisplayPort, 4/BNC, 5/BNC(CV), 6/
BNC(Y/C), 7/Computer, 8/Ethernet, or 9/USB-A buttons.
Eternet