Ricoh P C311W, User Manual, Page: 73 / 224

Admin. Tools
Energy Saver Mode
• EnergySaverMode 1
The machine enters EnergySaverMode 1 if the machine has been idle for about 30 seconds. It
takes less time to recover from EnergySaverMode 1 than from power-off state or
EnergySaverMode 2, but power consumption is higher in EnergySaverMode 1 than in
EnergySaverMode 2.
Default: [Off]
• Off
• On
• EnergySaverMode 2
The machine enters EnergySaverMode 2 after the period of time specified for this setting is
passed. The machine consumes less power in EnergySaverMode 2 than in EnergySaverMode
1, but it takes longer to recover from EnergySaverMode 2 than from EnergySaverMode 1.
Default: 1 minute
1 to 60 minutes
Language
Specifies the language used on the screen and in reports.
The default value for this setting is the language you have specified during the Initial Setup, which is
required after turning on the machine for the first time.
You can select the language you want to use. Available languages are as follows:
English, German, French, Italian, Spanish, Dutch, Swedish, Norwegian, Danish, Finnish,
Portuguese,
Czech, Hungarian, Polish, Simplified Chinese, Russian, Brazilian Portuguese,
Turkish, Traditional Chinese, Arabic
Reset Settings
Be sure not to clear the settings by mistake.
• Reset All Settings
Resets the machine's settings to their defaults except the following:
• Language settings
• Network Settings
Press the [OK] key to execute. Press the [Back] key to exit to the previous level of the menu
tree without clearing the settings.
• Reset Network Settings
Admin. Tools
71