manualshive.com logo in svg

Ricoh P C311W, User Manual, Page: 162 / 224

Share
Download
Ricoh P C311W User Manual Download Page 162

Message

Explanation

Recommended Action

Print Cart. Set Error #

The indicated print cartridge is
not installed correctly, or not
installed.

Install the indicated print
cartridge correctly.

The error message appears
even though the print cartridge
is installed correctly.

Using a dry cloth, carefully
wipe the interface area on the
print cartridge surface.

Fusing Unit Set Error

The fusing unit is not installed or
not installed correctly.

Install the fusing unit correctly.

Waste Toner Bottle: Not Set

The waste toner bottle is not
installed or not installed
correctly.

Install the waste toner bottle
correctly.
If the error message appears
even though the waste toner
bottle is attached correctly,
contact your service
representative.

ServiceCall - SCXXX

There is a problem with the
printer's controller.

Turn off the main power, and
then turn it on again.
If the error occurs again,
contact your sales or service
representative.

Density Sensor Require
Cleaning

Color registration failed.

Clean the toner density sensor.
See page 146 "Cleaning the
Toner Density Sensor".

7. Troubleshooting

160

Summary of Contents for P C311W

































































































































































































































Reviews:

No comments