Ricoh MP 2554 Series Manual Download Page 394

Page: 394 / 424

• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might

occur.

• Do not place heavy objects on the machine. Doing so can cause the machine to topple over,

possibly resulting in injury.

• Make sure the room where you are using the machine is well ventilated and spacious. Good

ventilation is especially important when the machine is used heavily.

• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal

components.

Handling power cords and power cord plugs

This section explains safety precautions about handling power cords and power cord plugs.

• Do not use any power sources other than those that match the specifications shown. Doing so

could result in fire or electric shock.

• Do not use any frequencies other than those that match the specifications shown. Doing so could

result in fire or electric shock.

• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

• Do not use extension cords. Doing so could result in fire or electric shock.

2. Safety Information for This Machine

Summary of Contents for MP 2554 Series









































































































































































































































































































































































































































Search results

Summary of Contents for MP 2554 Series

Reviews:

Brands by name

Popular brands

Ricoh MP 2554 Series, Manual

Search results

Summary of Contents for MP 2554 Series

Reviews:

Brands by name

Popular brands