manualshive.com logo in svg

Ricoh MP 2554 Series, Manual

Share
Download
Ricoh MP 2554 Series Manual Download Page 198

1.

Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.

DCG015

2.

Square the paper and load it print side up.

Do not stack paper over the limit mark.

DCG016

3.

Carefully push the paper tray fully in.

• Various sizes of paper can be loaded in the paper trays by adjusting the positions of side fences

and end fence. For details, see "Changing the Paper Size in Paper Trays", Paper Specifications and
Adding Paper.

• You can load envelopes in the paper trays. When loading envelopes, place them in the correct

orientation. For details, see page 179 "Envelopes".

Loading Paper into the Bypass Tray

Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that
cannot be loaded in the paper trays.

9. Adding Paper and Toner

160

Summary of Contents for MP 2554 Series









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands