Ricoh M080, Service Manual

Page: 98 / 294

Error Messages
M080 6-2 SM
6.2 ERROR MESSAGES
Here is a list of common error messages, a description of the problems, and their solutions.
This is just a reference information.
1st/2nd Message Problem/Solution
(A) Remove misfeed in Trays.
Opn & cls Frt. Cov.
Remove the jammed paper in the source tray, and
then load the paper again. To reset the error, open
the front cover and then close it.
(B) Open Paper Exit Cover and
remove misfeed.
Open the paper exit cover and remove jammed
paper.
(C) Open Rear Cover and
remove misfeed.
Open the rear cover and remove the jammed paper
inside the fusing unit.
(Y1) Remove misfeed in Tray 2.
Opn & cls Frt. Cov.
Remove the jammed paper in the source tray, and
then load the paper again.
(Y2) Remove misfeed in Tray 3.
Opn & cls Frt. Cov.
Remove the jammed paper in the source tray, and
then load the paper again.
(Z) Remove paper from the
Duplex Unit.
Detach the duplex unit and remove the jammed
paper inside the duplex unit.
@Remote Cert. update failed
Updating the @Remote certificate failed. Contact
your sales or service representative.
Cannot connect >
Comm.Serv. Check proxy
user/password.
The proxy user name or password is incorrect. Check
the proxy server settings, and change the user name
and/or password if they are incorrect.
Cannot connect with DHCP
server.(101/201)
Cannot obtain IP address from DHCP server. Consult
your network administrator.
Cannot connect with NetWare
print server. (107/207)
Connection with NetWare print server is unavailable.
Cannot connect with Net Ware
server.(106/206)
Connection with NetWare server is unavailable.
Consult your network administrator.