Ricoh M080 Service Manual Download Page 90

Page: 90 / 294

Updating the Firmware

M080 5-6

10. "Update done" appears on the LCD after completing the firmware updating.

11. Turn off the power, remove the SD card from Slot 2, and turn on the power.

-or-

If you intend to update another program, leave the SD card in Slot 2 and turn off and on the

power.

The firmware has not updated successfully if the "Update done" message does not

appear. If this occurs, turn the machine power off/on and repeat the procedure.

5.2.4 ERROR RECOVERY

Controller

If an error occurs during updating the controller firmware, use the following procedure. This

procedure will force the controller to boot from the firmware SD card.

1. Prepare an SD card with the required controller firmware version.

2. Turn off the machine and remove the controller.

3. Change the DIP Switch 1 [A] - No.1 setting to "OFF".

4. Put back the controller

5. Insert the SD card into the SD slot 2 (lower) on the controller.

6. Turn on the machine. The machine automatically starts to download the software.

7. When downloading is finished, "Updated" is displayed.

8. Turn off the machine, then remove the card.

Summary of Contents for M080







































































































































































































































































































Search results

Summary of Contents for M080

Reviews:

Related manuals for M080

Brands by name

Popular brands

Ricoh M080, Service Manual

Search results

Summary of Contents for M080

Reviews:

Related manuals for M080

Brands by name

Popular brands