Ricoh M080, Service Manual

Page: 219 / 294

Printer Engine Service Mode
SM Appendix 3-41 M080
Appe
ndix:
SP
Mode
Ta
b
le
s
5840 011
WEP key number
Determines how the initiator (SBP-2) handles subsequent login requests.
[00 to 11/00/1]
Note: There are four settings (binary numbers): 00, 01, 10, 11. These
settings are possible only after the wireless LAN card has been installed.
00: 1st key. If the initiator receives another login request while logging in, the
request is refused.
01, 10, 11: 2nd, 3rd, 4th keys are "Reserved".
5842
NFA analysis DFU Netfile Analysis
This is a debugging tool. It
sets the debugging output
mode of each Net File
process.
Bit SW 0011 1111
Bit Groups
0 System & other groups (LSB)
1 Capture related
2 Certification related
3 Address book related
4 Machine management related
5 Output related (printing, delivery)
6 Repository related
5844 USB
001
Transfer Rate
Sets the speed for USB data transmission.
[Full Speed or Auto Change ]
002
Vendor ID
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000 to 0xFFFF/1] (DFU)