Ricoh M080, Service Manual

Page: 175 / 294

Service Call Conditions
SM Appendix 2-27 M080
Appe
ndix:
T
rouble
-
shooting
Guide
992 C
Undefined error Defective software program
ƒ
An error undetectable by any
other SC code occurred
994 C
Operation Panel Management
Records Exceeded
An error occurred because the
number of records exceeded the limit
for images managed in the service
layer of the firmware. This can occur
if there are too many application
screens open on the operation panel.
No action required because this SC
does not interfere with operation of
the machine.
997 B
Application Selection Error An application did not start after
pressing the appropriate key on the
operation panel.
ƒ
Software bug; change the
firmware for the application that
failed
ƒ
A RAM or DIMM option required
by the application is not installed
or not installed correctly.
998 D
Application start error
ƒ
Software defective; change the
firmware for the application that
failed
ƒ
An option required by the
application (RAM, DIMM, board)
is not installed