Ricoh M080, Service Manual

Page: 173 / 294

Service Call Conditions
SM Appendix 2-25 M080
Appe
ndix:
T
rouble
-
shooting
Guide
914 D
External Controller error 5
The external controller alerted the
machine about an error.
ƒ
Please refer to the instructions
for the external controller.
915 D
Egret Controller error 6
001 Egret Controller Board Error
ƒ
Egret controller board defective
002
HDD Serial Communication
Error
ƒ
Egret HDD cable defective
ƒ
Egret HDD defective
003 Egret CPU Overheat Error
ƒ
Replace Egret controller board
004
Egret-GW Controller
Communication error 1
ƒ
Replace GW controller board
005
Egret-GW Controller
Communication error 2
ƒ
Egret-to-GW controller board
cable defective
ƒ
Egret controller board defective
ƒ
GW controller board defective
919 B
External Controller Down Error
ƒ
Power outage at the EFI
controller
ƒ
EFI controller was rebooted
ƒ
Connection to EFI controller
loose
While EAC (External Application
Converter), the conversion module,
was operating normally, the receipt
of a power line interrupt signal from
the FLUTE serial driver was
detected, or BREAK signal from the
other station was detected.
920 B
Printer error 1
ƒ
Software defective; turn the
machine off/on, or change the
controller firmware
ƒ
Insufficient memory
An internal application error was
detected and operation cannot
continue.