Ricoh M080, Service Manual

Page: 199 / 294

Printer Engine Service Mode
SM Appendix 3-21 M080
Appe
ndix:
SP
Mode
Ta
b
le
s
5507 166 Interval: LT
5507 172 Interval: HLT
5515*
SC/Alarm Setting
With @Remote in use, these SP codes can be set to issue an SC call when
an SC error occurs. If this SP is switched off, the SC call is not issued when
an SC error occurs.
001 SC Call
[0 or 1 / 1 / 1] 0: OFF 1: ON
002 Service Parts Near End Call
[0 or 1 / 0 / 1] 0: OFF 1: ON
003 Service Parts End Call
004 User Call
[0 or 1 / 1 / 1] 0: OFF 1: ON 006 Communication Information Test Call
007 Machine Information Notice
008 Alarm Notice [0 or 1 / 0 / 1] 0: OFF 1: ON
009 Non Genuine Toner
[0 or 1 / 1 / 1] 0: OFF 1: ON 010 Supply Automatic Ordering Call
011 Supply Management Report Call
5801
Memory Clear
Resets NVRAM data to the default settings. Before executing any of these
SP codes, print an SMC Report.
5801 001 All Initializes items 2 to 15 below.
5801 002 Eng Memory Clr
Initializes all registration settings for the engine and
process settings.
5801 003 SCS
Initializes default system settings, SCS (System
Control Service) settings, operation display
coordinates, and ROM update information.