Ricoh M080, Service Manual

Page: 193 / 294

Printer Engine Service Mode
SM Appendix 3-15 M080
Appe
ndix:
SP
Mode
Ta
b
le
s
SP3-xxx: Process
3923
Cartridge Stop
Determines whether the machine stops printing after the cartridge counter
reaches a set number of main motor rotations.
[0 or 1 / 1 /-]
0: No: Does not stop after the number of rotations is exceeded.
1: Yes: Stops after the number of rotations is exceeded.
3924 Toner End Sensor
3924 001 Toner Near-end
Threshold adjustment for toner near-end detection.
[100 to 1000/ 200 /100 ms step]
3924 002 Toner End
Threshold adjustment for toner end detection.
[100 to 1000/ 550 /100 ms step]
3926
Prevention of fi Prevention of Filming
No , Yes
If set to "Yes": This is done every 50 prints, for 0.2 s, to lubricate the
cleaning blade. The charge roller voltage is cut, and toner is transferred to
the cleaning blade. If the 50-print interval is reached during a job, printing
stops and this process is done.
Set this to yes to prevent the following:
ƒ
Grey banding parallel to the paper feed direction
ƒ
Cleaning blade flipping due to friction between blade and drum
ƒ
Noise due to friction between blade and drum