Ricoh M022, Service Manual

Page: 994 / 1152

001 Access User Max Num *CTL
Limits the number of users used by the access
exclusion and password attack detection
functions.
[50 to 200 / 200 / 1 users]
002 Access Password Max Num *CTL
Limits the number of passwords used by the
access exclusion and password attack detection
functions.
[50 to 200 / 200 / 1 passwords]
003 Monitor Interval *CTL
Sets the processing time interval for referencing
user ID and password information.
[1 to 10 / 3 / 1 sec.]
5417 [Access Attack]
001 Access Permissible Number *CTL
Sets a limit on access attempts when an excessive
number of attempts are detected for MFP
features.
[0 to 500 / 100 / 1]
002 Attack Detect Time *CTL
Sets the length of time for monitoring the
frequency of access to MFP features.
[10 to 30 / 10 / 1 sec.]
003 Productivity Fall Wait *CTL
Sets the wait time to slow down the speed of
certification when an excessive number of access
attempts have been detected.
[0 to 9 / 3 / 1 sec.]
004 Attack Max Num *CTL
Sets a limit on the number of requests received
for certification in order to slow down the
certification speed when an excessive number of
access attempts have been detected.
[50 to 200 / 200 /1 attempt]
5420
[User Authentication]
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been enabled.
3. Appendix: SP Mode Tables
248
3
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA