Ricoh M022, Service Manual

Page: 604 / 1152

008 Bit Switch 8 0 1
bit 0
to 2
DFU - -
bit 3
[PCL,PS]: Allow BW jobs to print without requiring
User Code
0: Disable
1: Enable
(allow BW
jobs to print
without a user
code)
BW jobs submitted without a user code will be printed even if user code authentication
is enabled.
Note: Color jobs will not be printed without a valid user code.
bit 4
to 7
DFU - -
1001 Bit Switch
009 Bit Switch 9 0 1
bit 0
PDL Auto Detection timeout of jobs submitted via USB
or Parallel Port (IEEE 1284).
0: Disable
(Immediatel
y)
1: Enable
(10 seconds)
To be used if PDL auto-detection fails. A failure of PDL auto-detection does not
necessarily mean that the job cannot be printed. This bit switch tells the device whether
to time-out immediately (default) upon failure or to wait 10 seconds.
bit 1 DFU - -
bit 2 DFU - -
bit 3
to 7
DFU - -
1003 [Clear Setting]
1003 001 Initialize System
Initializes settings in the System menu of the user
mode.
1003 003 Delete Program DFU
5. System Maintenance
602
5
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA