Ricoh M022, Service Manual

Page: 909 / 1152

006 Paper Transfer: Low: 2: S3 *ENG
[1 to 100 / 27 / 1 /step]
165 mm > S3 size ≥ 139 mm (Paper
width)
007 Paper Transfer: Low: 1: S4 *ENG
[1 to 100 / 24 / 1 /step]
139 mm > S4 (Paper width)
008 Paper Transfer: Low: 2: S4 *ENG
[1 to 100 / 27 / 1 /step]
139 mm > S4 (Paper width)
2871
[SP 3: L-Edge Correct] DFU
Special 3 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2852 and SP2857 are multiplied by these SP values.
Low: 85 mm/sec
• The paper leading edge area can be adjusted with SP2872.
003 Paper Transfer: Low: 1st *ENG
[0 to 995 / 100 / 5%/step]
004 Paper Transfer: Low: 2nd *ENG
007 Separation DC: Low: 1st *ENG
008 Separation DC: Low: 2nd *ENG
2872
[SP 3: Switch Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
Low: 85 mm/sec
003 Paper Transfer: Low: 1st *ENG
[0 to 50 / 0 / 2 mm/step]
004 Paper Transfer: Low: 2nd *ENG
007 Separation DC: Low: 1st *ENG
008 Separation DC: Low: 2nd *ENG
System SP2-xxx
163
3
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA