Ricoh M022, Service Manual

Page: 510 / 1152

5888 [Personal Information Protect]
001 - *CTL
Selects the protection level for logs.
[0 to 1 / 0 / 1}
0: No authentication, No protection for logs
1: No authentication, Protected logs (only an
administrator can see the logs)
5893
[SDK Application Counter]
Displays the counter name of each SDK application.
001 SDK-1 *CTL -
002 SDK-2 *CTL -
003 SDK-3 *CTL -
004 SDK-4 *CTL -
005 SDK-5 *CTL -
006 SDK-6 *CTL -
5894
[External Counter Setting]
DFU
001 Switch Charge Mode *ENG [0 to 2 / 0 / 1/step]
5907 [Plug & Play Maker/Model Name]
001
Selects the brand name and the production name for Windows Plug & Play. This information
is stored in the NVRAM. If the NVRAM is defective, these names should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time. When the setting
is completed, the beeper sounds five times.
5913 [Switchover Permission Time]
002
Print Application Timer *CTL [3 to 30 / 3 / 1 second /step]
Sets the amount of time to elapse while the machine is in standby mode (and the operation
panel keys have not been used) before another application can gain control of the display.
5. System Maintenance
508
5
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA