Ricoh M022, Service Manual

Page: 781 / 1152

002
After Job End ENG [0 to 10 / 5 / 1 sec/step]
Specifies the idling time without the lamp on after job end.
This idling prevents the heating roller overheating after job end.
1118 [Curl Correction]
001
Execute Pattern *ENG [0 to 4 / 0 / 1]
Selects the curl correction mode.
0: Invalid
1: 600 dpi
2: 1200 dpi
3: 600/1200 dpi
• This SP is not effective for all curl situations. Use this SP if you see a sharp back curl after
the machine recovered from "OFF mode" in a high temperature and humidity
environment.
002
Humidity Thresh 1 *ENG [0 to 100 / 65 / 1 %]
Specifies the first threshold humidity for executing the curl correction.
003
Humidity Thresh 2 *ENG [0 to 100 / 80 / 1 %]
Specifies the second threshold humidity for executing the curl correction.
004 Pattern 1: MM: H-Roll *ENG [-30 to 0 / -3 / 1 deg]
005 Pattern 1: MM: P-Roll *ENG [0 to 60 / 0 / 1 deg]
006 Pattern 1: HM: H-Roll *ENG [-30 to 0 / 0 / 1 deg]
007 Pattern 1: HM: P-Roll *ENG [0 to 60 / 0 / 1 deg]
008 Pattern 2: MM: H-Roll *ENG [-30 to 0 / -5 / 1 deg]
009 Pattern 2: MM: P-Roll *ENG [0 to 60 / 50 / 1 deg]
010 Pattern 2: HM: H-Roll *ENG [-30 to 0 / -5 / 1 deg]
011 Pattern 2: HM: P-Roll *ENG [0 to 60 / 50 / 1 deg]
1119 [Fusing FF Control] DFU
System SP-xxx
35
3
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA