Ricoh M022, Service Manual

Page: 478 / 1152

5508* [CC Call] *CTL -
001*
Jam Remains 0: Disable, 1: Enable
Enables/disables initiating a call for an unattended paper jam.
002*
Continuous Jams 0: Disable, 1: Enable
Enables/disables initiating a call for consecutive paper jams.
003*
Continuous Door Open 0: Disable, 1: Enable
Enables/disables initiating a call when the front door remains open.
011*
Jam Detection: Time Length [3 to 30 / 10 / 1 minute /step]
Sets the time a jam must remain before it becomes an “unattended paper jam”. This setting
is enabled only when SP5508-004 is set to "1".
012*
Jam Detection: Continuous Count [2 to 10 / 5 / 1 /step]
Sets the number of consecutive paper jams required to initiate a call. This setting is enabled
only when SP5508-004 is set to "1".
013*
Door Open: Time Length [3 to 30 / 10 / 1 /step]
Sets the length of time the door remains open before the machine initiates a call.
This setting is enabled only when SP5-508-004 is set to "1".
5515
[SC/Alarm Setting]
With @Remote in use, these SP codes can be set to issue an SC call when an SC error
occurs. If this SP is switched off, the SC call is not issued when an SC error occurs.
001 SC Call
[0 or 1 / 1 / - ]
0: Off, 1: On
002 Service Parts Near End Call
[0 or 1 / 1 / - ]
0: Off, 1: On
003 Service Parts End Call
004 User Call
[0 or 1 / 1 / - ]
0: Off, 1: On
006 Communication Test Call
007 Machine Information Notice
5. System Maintenance
476
5
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA