manualshive.com logo in svg

Ricoh M C251FW, User Manual

Share
Download
Ricoh M C251FW User Manual Download Page 366

If paper jams inside the transfer unit

If paper jams inside the transfer unit, follow the procedure below to remove it.

1.

Pull the front cover open lever and then carefully lower the front cover.

ECC115

2

1

2.

Carefully remove any paper that is jammed under the transfer unit.

ECC162

If you cannot find the jammed paper, look inside the machine.

3.

Using both hands, carefully push up the front cover until it closes.

ECC117

When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.

10. Troubleshooting

364

Summary of Contents for M C251FW

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands